Acoustic 25.4 Neck Blank -- gen mah

Description

Acoustic Neck
Gen. Mah
Model 25.4
25.4 scale
By Penta Guitarworks
Made in the USA
Please note: This product may take up to 10 working days until it ships out depending on our backlog
*****
1.5 degree shoulder cut in,
leaving the tenon oversized at 1 7/8" wide by 3 3/4" high
and 1" long so that you can make your own dovetail or bolt-on
the size that you need; the heel is 4"high.  You also get
a rounded shank, a volute behind the nut,
an 11 degree pitched headstock,
This model will come with wings glued on each side of the headstock
a 1/4"w x 7/16" truss rod slot flat on the bottom.
If you are adjusting the truss rod from the head stock and need it with the pocket hole  cut into the head stock,
let us know when you order and we will cut it in at no extra charge.
Other wise, it will be assumed that you are adjusting it from the sound hole
and will be shipped without the pocket hole cut in.
These blanks are made in Barberton, OH, USA,
by Americans.  The best part is that they are only
rough sanded leaving the final tweaking for you to do
so you can call it your own. Please note measurements
are within 1/32 of an inch.
1 3/4" at the nut and 2 3/16" at the body.
NOTE:  The bottom 1 7/8" of the heel is glued on.
.
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application