Bosch RFSM RADION Smoke And Heat Detector Wireless

Description

RFSM RADION Smoke And Heat Detector
RADION wireless security solution from Bosch provides the range, scalability and exceptional battery life required to ensure reliable performance and superior quality. Advanced diagnostics and multiple device enrollment options make installation and maintenance simple and cost effective. With a complete line of peripherals, RADION provides the flexibility for virtually any application requirement.
RADION smoke is a photoelectric wireless detector that transmits alarm signals to the wireless receiver when smoke is detected. RFSM-A version includes both rate of rise and fixed threshold temperature heat detection.
Alarm Mode
The detector’s built-in 85 dBA sounder initiates an alarm signal and an RF signal indicating the alarm condition is sent when the detector goes into alarm mode. The receiver signals the control panel identifying the specific detector in alarm. Alarm conditions are non-latching so if the alarm condition goes away (smoke dissipates), the detector returns to a normal state.
-Externally visible LED that indicates smoke detector status
-A built-in sounder for alarm alerts
-Supervised for low-battery, cover tamper, and removal from mounting surface tamper conditions
-Operational up to 5 years using two user replaceable CR123A
Lithium batteries
The photoelectric smoke detector continuously acquires ambient obscuration data as it monitors the surrounding environment. The red LED blinks every time a sample is taken. If any one sample is above the calibrated alarm threshold, two more samples are taken at 4 second intervals. If all three samples are above the calibrated alarm threshold, the detector goes into alarm mode.
Status indicator
The LED and sounder indicate the status of the detector but not of the RF signaling circuitry. Under normal conditions, the red LED flashes regulary while the sensor monitors the surrounding environment. When the sensor detects smoke, the LED changes from flashing to steady ON and the sounder produces a loud, continuous tone.
Test Silence button operation
A Test Silence button allows for performance of the sounder and sensitivity tests and silencing of alarm sounder and trouble chirp.
Drift compensation
The detector has built-in drift compensation that allows the alarm to adjust sensitivity automatically as it becomes dirty over time. The drift compensation feature dramatically increases the time between cleanings, as well as reducing the chance of a nuisance alarm.